If you have a single blade carriage, you simply add more pauses and ignore the red and blue tool choices you see here. We ’ve got three sketch colors here, so we are sketching with the left holder then the right holder, and then we are going to swap out for a third color and a cutting blade during a pause. That was a simple example, but you can get pretty complex with multiple sketch colors on these advanced cut settings. If your Silhouette doesn’t have dual tool holders, remember you can add a Pause between lines to manually change your tool. Now this design is ready to sketch with the right tool holder and then cut with the left tool holder. The red line color is for cutting, so we’ll leave it with the red (or left) tool holder and change the Material to “Cardstock, Plain.” We want this to Cut with the AutoBlade. We want to sketch first with the Right Tool Holder of the CAMEO 3, so we’ll drag the green color to the top and choose the blue tool.įor the material, we will choose “Cardstock, Plain.” For the Action, we want to choose Sketch, and the tool will automatically change to a sketch pen. You can see each line color is represented here. This time we will choose the Line action. With this train design, what we want to sketch has a green line color and what we the offset line we want to cut has a red line color. We will show you a different example where we want to sketch, then cut around the sketched design. It’s basically the same as cutting by Fill Color, but you will use the line colors to designate the cuts instead of fill colors. Next let’s look at cutting by Line Color. Now we are ready to send the project to the Silhouette to cut. If we were using a ratchet blade, we would need to add a Pause between each line so that we could manually adjust the blade between each material before clicking “Resume.” We want these all to cut, and we are using the AutoBlade for the whole job. We’ve already selected the material type for each color, which can be verified or adjusted in this area below. The machine will cut from the top down on this list, so simply drag a box color up or down if you want to move its position in the queue. You even have choices of Cut and Cut Edge for each line here in the advanced settings if you have overlapping shapes. You can use the check boxes to turn off or on each fill color. We are just going to use the AutoBlade in the left tool holder, and it will adjust itself in between each line. We are using a CAMEO 3, so we have two tool choices available for each line. We’ve chosen a different material type for each fill color and will just make sure that portion of the mat is covered with the correct paper for each shape. Let’s go to the Send panel, and you’ll see each fill color on the page is represented on its own line. ![]() ![]() We can cut them all at once on the mat in the same cut job. We’ve got this globe filled with color to represent the different papers we have, but they are not all the same type of paper. ![]() Let’s look at cutting by Fill Color first. You might use these advanced cutting choices if you are cutting from multiple types of material on the same mat, or if you want to use a combination of tools, such as sketch then cut. To break up your project into multiple cutting stages, you can use Action by Line Color or by Fill Color. Simple basically means all the lines are scheduled to cut at the same time, which is what you would use if you are cutting the entire design at once out of a single material. Designer Edition and higher users will also see Layer as a choice. In the Send panel, you’ll see several choices across the top for “Action by:”, which are Simple, Line, and Fill. This tutorial will cover cutting by Line Color and by Fill Color. ![]() When you’re ready to cut a design, you have several options in the way it cuts.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |